How to Update Storex Ezee Tab 706 Firmware
How to Update Storex Ezee Tab 706 Firmware
Storex Ezee Tab 706 is a 7-inch tablet powered by an Allwinner A33 processor. It runs on Android 4.4 KitKat operating system and has a 1024x600 resolution display. If you own this device and want to update its firmware, you may follow these steps:
Storex ezee tab 706 firmware
Download the firmware file from this link. It is a zip file that contains the flash tool and the firmware image.
Extract the zip file to a folder on your computer. You will see a folder named "inet 86vz rev03" that contains the flash tool and the firmware image.
Install the USB drivers for your device from this link. You will need to enable USB debugging mode on your device and connect it to your computer via USB cable.
Run the flash tool as administrator. It is a file named "PhoenixSuit.exe" in the "inet 86vz rev03" folder.
Select "Firmware" from the menu and click on "Image". Browse to the folder where you extracted the zip file and select the firmware image file named "inet_86vz_rev03_20130708.img". Click on "Open".
Click on "Upgrade" and wait for the flash tool to detect your device. If it asks you to format your device, click on "Yes". If it asks you to select a key mode, choose "Normal Mode".
The flash tool will start flashing the firmware to your device. Do not disconnect or power off your device during this process. It may take several minutes to complete.
When the flash tool shows a green tick mark, it means the firmware update is successful. You can disconnect your device and reboot it.
Congratulations! You have successfully updated your Storex Ezee Tab 706 firmware. Enjoy your improved performance and stability.
If you encounter any problems or errors while updating your Storex Ezee Tab 706 firmware, you can try the following troubleshooting tips:
Make sure your device has enough battery power before starting the update. It is recommended to charge it to at least 50%.
Make sure you have downloaded the correct firmware file for your device model and version. Do not use firmware files from other sources or devices.
Make sure you have installed the correct USB drivers for your device on your computer. You can check the device manager on your computer to see if your device is recognized properly.
Make sure you have followed the instructions carefully and selected the right options in the flash tool. Do not interrupt or cancel the update process once it has started.
If the flash tool fails to detect your device or shows an error message, you can try to switch to a different USB port or cable. You can also try to reinstall the USB drivers or restart your computer and device.
If none of these tips work, you can contact Storex customer support for further assistance. You can find their contact details on their official website or in the user manual of your device.
Updating your Storex Ezee Tab 706 firmware can bring many benefits to your device, such as fixing bugs, improving performance, adding new features, and enhancing security. However, updating your firmware also involves some risks, such as losing data, bricking your device, or voiding your warranty. Therefore, you should always backup your important data before updating your firmware and follow the instructions carefully. You should also only update your firmware when necessary and not too frequently.
We hope this article has helped you to update your Storex Ezee Tab 706 firmware successfully. If you have any questions or feedback, please leave a comment below. Thank you for reading. e0e6b7cb5c